Prepared feed
Fruit variety, ripeness, temperature, largest piece and permitted inclusions.
Home / Selection
Fruit Crusher Selection Guide & PS Model Comparison
Select a fruit crusher by prepared feed, required throughput, mash quality, downstream connection, cleaning access and electrical service.
Six decisions that shape the right machine.
Working assembly
The actual tooling, clearance and screen matched to the required mash.
Required feed rate
Continuous and peak kg/h on stated feed conditions, separate from sample observations.
Mash handover
Gravity, pump or conveyor transfer with receiver-full and blocked-discharge responses.
Cleaning & access
Opening, drainage, removal and reassembly in the proposed installation.
Supply & controls
Voltage, frequency, phase, stopping boundaries and the actual motor and panel.
Use the catalogue as a starting point
| PS model | Catalogue feed rate | Motor power | Published speed |
|---|---|---|---|
| PS-1 | 1 t/h | 2.2 kW | 1470 r/min |
| PS-5 | 5 t/h | 5.5 kW | 1470 r/min |
| PS-10 | 10 t/h | 11 kW | 1470 r/min |
| PS-15 | 15 t/h | 15 kW | 1470 r/min |
| PS-25 | 25 t/h | 22 kW | 1470 r/min |
Catalogue prepared-feed references, not guaranteed capacity for every fruit. Confirm performance, dimensions and working parts for the exact offered model.
Bring the evidence into one brief
A useful trial records the actual feed, machine identity, parts, settings, input mass, duration, output samples and downstream response. Include wear and cleaning observations after the same run.
Build your material and trial brief Read the acceptance checklist →LET’S DEFINE YOUR MACHINE
Your fruit. Your feed rate.
Your next processing step.
Send the conditions you know. We’ll discuss the model, working parts and interfaces your quotation needs to cover.